Hardware version 4.0

Learn about the In/Out device! The In/Out Device v4.0 is different in form from the previous In/Out Device generations.

Click here to visit corresponding v3.0 page    For In/Out v3.0, please visit this page instead.

Packaging content v4.0

In/Out Device v4.0

The device has a power button on the right. The battery is internal and there is no screen as the device is monitored and operated by your smartphone with an Android or iOS App.

L-attachment and Band

The L-attachment accessory to attach the Net Device version 4.0 to the net post of a tennis court should include a small silicone gasket as shown on the pictures below. They are provided with the accessory. Those silicone gaskets are very important and should be kept on the accessory because they will allow you to properly unscrew the Net Device.

Attach to the green L-attachment, the side of the band that has only one hole. Screw the device to the L-attachment. The device will continue to screw forever so that you can adjust the angle of the device on the net post.

To unscrew the device, you don't need to force but you need to snap and rotate the device in the counter-clockwise direction. See this video:

Unscrew v4

Important Tip: When installing on court, it's recommended to attach the L-Attachment without the device on the net post first, before screwing the device.

Important Tip: When uninstalling from the net post, it's recommended to unstrap and detach the L-Attachment and the device together. Then unscrew the device as explained above. See the page "On court".

4 feet

The 4 feet are optional. They can be put to the L-attachment in rare situation where the net cord spool is outside of the net post as shown in the following picture:

Comparison of hardware versions

There are five hardware versions of the Net Device:

Net Device Info
V4.0
Shipping starting December 2023
Bottom is blue, no screen, phone holder.
V3.0
Shipping starting February 2021
Bottom is green, third camera.
V2.0
Shipping starting September 2019
Bottom is green.
V1.1
Shipping starting March 2018
Bottom is blue (lenses are circled).
V1.0
Shipping starting September 2017
Bottom is blue.

There are two hardware versions of the Line Device:

Line Device Info
V3.0 and V4.0
Shipping starting February 2021 and December 2024
Device is light blue.
V2.0
Shipping starting September 2019
Device is white.